Brizo RP92044 Levoir® 7 1/2″ Shower Arm and Flange

Seven and a Half Inches of Precision

Measure the distance from your wall to where the shower head should sit. Seven and a half inches. That is the measurement the designers at Brizo chose for the Levoir shower arm. It is not arbitrary. It is calculated. A shorter arm crowds the shower head against the wall. The water falls too close to the tile. You have to stand awkwardly to get under the spray. A longer arm extends the head too far into the shower space. It becomes a hazard. You bump into it. The proportions feel off. The Levoir arm positions the head exactly where it should be. The water falls naturally. You stand comfortably. The look is balanced. This is not an accident. It is a decision. And it makes all the difference.

The Flange That Finishes the Wall

The shower arm connects to the wall. But the connection is not always pretty. There is a hole. There are threads. There is a rough opening where the arm meets the tile. The flange covers all of it. The Levoir RP92044 includes the flange with the arm. The flange is not optional. Without it, the installation looks incomplete. The hole shows. The threads are visible. The wall looks unfinished. With the flange, the connection is clean. The arm appears to emerge from the wall as one continuous piece. The look is intentional. The installation is finished. The flange is a small detail. But it is the detail that separates a professional installation from a DIY approximation. For homeowners in Toronto and Vancouver who care about the details, the flange matters. For renovators in Calgary and Edmonton who want a clean finish, the flange is essential.

The 1/2-Inch NPT Threads That Connect

The Levoir shower arm uses 1/2-inch NPT threads. This is the standard size for shower arms and shower heads in Canadian homes. The threads match standard wall supply elbows. The threads match standard shower head connections. The installation is straightforward. Unscrew the old arm. Wrap the threads with plumber’s tape. Screw in the new arm. Slide the flange against the wall. Attach the shower head. The process takes minutes. No special tools. No adapters. No compatibility concerns. For anyone replacing an old arm or installing a new shower head, the Levoir arm fits.

The Design That Coordinates

The Levoir collection is known for refined simplicity. The design draws from classic forms and reimagines them for modern bathrooms. The shower arm carries that design language. The lines are clean. The profile is slim. The finish coordinates with other Levoir fixtures. The faucets. The tub filler. The shower trim. The look is cohesive. The design is intentional. When the shower arm matches the rest of the bathroom, the space feels considered. It feels designed. The Levoir arm is not a generic pipe. It is a piece of the collection.

What Installation Requires

The Levoir shower arm installs on a standard shower arm connection. The 1/2-inch NPT threads match the wall supply elbow. The arm screws into place. The shower head attaches to the other end. The flange slides against the wall. The installation is straightforward for a licensed plumber or experienced DIYer. The arm is constructed of brass. The standard fittings are included. The finish coordinates with other Levoir collection fixtures.

To complete the shower setup, consider a 2 Functions Shower Systems configuration for a coordinated shower system. For the towel area, browse our Thermostatic Valve category for matching Levoir accessories.

Frequently Asked Questions

What is the length of this shower arm?

The Levoir RP92044 shower arm measures 7 1/2 inches from the wall to the shower head connection. This length positions the shower head at the correct distance from the wall for comfortable use.

Does this shower arm include the flange?

Yes. The flange is included with the shower arm. The flange covers the rough opening where the arm meets the wall. The flange creates a clean, finished look.

What size threads does this shower arm have?

The Levoir shower arm uses 1/2-inch NPT threads. This is the standard size for shower arms and shower heads in Canadian homes. The threads match standard connections.

Can I install this shower arm myself?

Yes. The installation is straightforward. Unscrew the old arm from the wall. Wrap the threads of the new arm with plumber’s tape. Screw the new arm into the wall supply elbow. Hand tighten. Slide the flange against the wall. Attach the shower head. The installation takes minutes.

The Shower Arm That Completes the Wall

The Brizo Levoir RP92044 7 1/2 inch shower arm and flange is in stock and ready to ship from our Canadian warehouse. Delivery typically takes 3 to 5 business days. We offer a 30-day return policy and a support team that answers real questions by phone or email.

Seven and a half inches. The right length. The right look. The Levoir shower arm finishes the wall.